Upgrade to TeamForge 8.2 - GIT on a separate server

In this procedure, we'll assume that you are upgrading on the same server where your existing TeamForge 8.1 site is running.

Do the following on the application server - my.app.host

1. Uninstall the TeamForge CLI add-on.
   Important: You must have no tasks in progress while uninstalling the CLI add-ons.
   • cd /opt/collabnet/teamforge/add-ons/teamforge_cli_server
   • custom-install --uninstall
   • yum erase teamforge_cli_server
2. Stop TeamForge.
   • /etc/init.d/collabnet stop all
3. No backup is required for same hardware upgrades. However, you can create a backup as a precaution. See Back up and restore CollabNet TeamForge data to learn more about backing up TeamForge database and file system.

4. Upgrade the operating system packages.
   • yum upgrade
5. Create a file, /etc/security/limits.d/teamforge.conf, and make sure it has the following "nproc" and "nofile" settings.
   • vim /etc/security/limits.d/teamforge.conf
   • sf-admin soft nproc 10240
   • sf-admin hard nproc 10240
   • sf-admin hard nofile 65536
   • sf-admin soft nofile 65536
   • Save the file and reboot the server.
6. If the TeamForge server has SELinux enabled, run it in 'Permissive' mode temporarily while installing or upgrading TeamForge.
   1. Verify if SELinux is running in enforcing mode.
      • getenforce
   2. If the output of the getenforce command is "Permissive", continue with the next step. If not, run the following command to bring it to 'Permissive' mode.
      • setenforce 0
   See Set up SELinux to have TeamForge run in SELinux mode after completing the installation or upgrade.
7. Configure your TeamForge installation repository.
   • TeamForge installation repository configuration for sites with internet access
   1. Contact the CollabNet Support and download the TeamForge 8.2 installation repository package to /tmp.
   2. Install the repository package.
      • yum install -y /tmp/collabnet-teamforge-repo-8.2.0.0-1.noarch.rpm
   3. Refresh your repository cache.
      • yum clean all
   • TeamForge installation repository configuration for sites without internet access
   1. Contact the CollabNet Support to get the auxiliary installer package for TeamForge 8.2 disconnected installation and save it in /tmp.
      • Red Hat Enterprise Linux/CentOS 6.7 64 bit RPM package: CTF-Disconnected-media-8.2.0.0-4729.rhel6.x86_64.rpm
   2. Unpack the disconnected installation package.
      • rpm -Uvh <package-name>
   3. Note: If the Red Hat Enterprise Linux/CentOS installation DVD is mounted already, skip the following instructions. If not, mount the DVD.
      Mount the Red Hat Enterprise Linux/CentOS installation DVD. The DVD contains the necessary software and utilities required for installing TeamForge without internet access.

      In the following commands, replace "cdrom" with the identifier for your server's CD/DVD drive, if necessary.

      • cd /media/
      • mkdir cdrom
      • mount /dev/cdrom ./cdrom/

      If there are any spaces in the automount, unmount it first and mount it as a filepath, with no spaces.

   4. Create a yum configuration file that points to the Red Hat Enterprise Linux/CentOS installation DVD.
      • vi /etc/yum.repos.d/cdrom.repo
      Here's a sample yum configuration file.

      [RHEL-CDROM] 
      name=RHEL CDRom 			
      baseurl=file:///media/cdrom/Server/
      gpgfile=file:///media/cdrom/RPM-GPG-KEY-redhat-release 
      enabled=1
      gpgcheck=0

   5. Verify your yum configuration files.
      • yum list httpd
      • yum list apr
   6. Download the code search installation package, CodeSearch-installer-2.1.3-1.noarch.rpm from https://ctf.open.collab.net/sf/go/rel4193 and save it in the /tmp directory. To install the Black Duck Code Sight installer, run the following command.
      • cd /tmp
      • rpm -ivh CodeSearch-installer-2.1.3-1.noarch.rpm
8. If the PostgreSQL database is running locally, stop the PostgreSQL service.
   • /etc/init.d/postgresql-9.3 stop
9. Install the following application packages.
   1. TeamForge: To install the TeamForge application packages run the following command:
      • yum install teamforge

      Run the following command to install the Binary application packages.

      • yum install collabnet-binary
      Tip: If you have Black Duck Code Sight already, it is automatically upgraded when you run yum install teamforge. In such case, you can skip the following sub-step.
   2. Black Duck Code Sight: To install the Black Duck Code Sight packages run the following command:
      • yum install teamforge-codesearch
10. Set up your site's master configuration file.
    Always use the site-options-dedicated.conf file that's packaged with the TeamForge version you are upgrading to. Refer to the TeamForge 8.1 site-options.conf file, understand your site settings and set up your TeamForge 8.2 site-options.conf file.

    CAUTION:

    You run the risk of missing out on newly added site option tokens if you keep reusing your site-options.conf file from an older TeamForge version on newer versions. See the New features in CollabNet TeamForge 8.2 section of the Release Notes to know what's new with site-options.conf tokens.
    1. Back up your existing site-options.conf as site-options-old.conf.
       • cd /opt/collabnet/teamforge-installer/8.2.0.0/
       • mv conf/site-options.conf conf/site-options-old.conf
    2. Copy the /opt/collabnet/teamforge-installer/8.2.0.0/conf/site-options-dedicated.conf file to the TeamForge installer directory.
       • cd /opt/collabnet/teamforge-installer/8.2.0.0/
       • cp conf/site-options-dedicated.conf conf/site-options.conf
    3. Set up your site options: In addition to the new site options you may set up for TeamForge 8.2, refer to the TeamForge 8.1's site-options-old.conf file and make sure that the TeamForge 8.2 site-options.conf file inherits all the required site options.
       • sudo vi /opt/collabnet/teamforge-installer/8.2.0.0/conf/site-options.conf
    4. Update the host name and domain name, if required.

       HOST_localhost=app database datamart etl indexer subversion cvs

       DOMAIN_localhost=my.app.domain.com

       HOST_my.git.domain.com=gerrit

       Add 'codesearch' to the HOST_localhost token if you are installing Black Duck Code Sight.

       HOST_my.localhost= app database datamart etl indexer subversion cvs codesearch

       Add 'binary' to the HOST_localhost token if you are installing Nexus.

       HOST_my.localhost= app database datamart etl indexer subversion cvs codesearch binary

    5. Turn on the SSL for your site by editing the relevant variables in the site-options.conf file. To generate the SSL certificates, see Generate SSL certificates.

       SSL=on

       SSL_CERT_FILE

       SSL_KEY_FILE

       SSL_CHAIN_FILE

       Note: The SSL_CERT_FILE and SSL_KEY_FILE tokens need an absolute path. The SSL_CHAIN_FILE token is optional.
    6. If the token REQUIRE_PASSWORD_SECURITY is enabled, then set a value for the token, PASSWORD_CONTROL_EFFECTIVE_DATE.
       CAUTION:
       The Password Control Kit (PCK) disables, deletes or expires user accounts that don't meet the password security requirements starting from the date set for the PASSWORD_CONTROL_EFFECTIVE_DATE token. If a date is not set, the PCK disables, deletes or expires user accounts immediately. See PASSWORD_CONTROL_EFFECTIVE_DATE for more information.
    7. TeamForge 7.1 and later support automatic password creation. See AUTO_DATA for more information.
    8. Password obfuscation: The password obfuscation is enabled by default. As a result, all password-related tokens are encrypted in all the TeamForge configuration files.
       Restriction: The password-related tokens cannot contain the following characters in the site-options.conf file: $<>/\'"`
       • To disable password obfuscation, set OBFUSCATION_ENABLED=false.
       • To configure the obfuscation key, set OBFUSCATION_KEY=<Any AlphaNumeric value with length >= 8 bytes>. The default value of OBFUSCATION_KEY token is XSJt43wN.
    9. Ensure to set the token DEDICATED_INSTALL=true.
    10. Include the list of non-expiring TeamForge user accounts (password never expires).

        USERS_WITH_NO_EXPIRY_PASSWORD=admin,nobody,system,scmviewer,scmadmin

    11. Make sure that the following tokens have a value if ETL is enabled.

        SOAP_ANONYMOUS_SHARED_SECRET

        ETL_SOAP_SHARED_SECRET

    12. Configure the Black Duck Code Sight tokens. See Black Duck Code Sight site-option tokens.
    13. To enable the history protection feature of TeamForge Git integration, set the GERRIT_FORCE_HISTORY_PROTECTION=true. For more information, see GERRIT_FORCE_HISTORY_PROTECTION.
    14. If you have LDAP set up for external authentication, you must set the “REQUIRE_USER_PASSWORD_CHANGE” site options token to false.
    15. Ensure to set the token SELINUX_SETUP=true.
    16. Configure the JBOSS_JAVA_OPTS site-options.conf token. See JBOSS_JAVA_OPTS.
        Important: All JVM parameters but -Xms1024m and -Xmx2048m have been hard-coded in the TeamForge core application. You need not manually configure any other parameter (such as -XX:MaxMetaspaceSize=512m -XX:ReservedCodeCacheSize=128M -server -XX:+HeapDumpOnOutOfMemoryError -Djsse.enableSNIExtension=false -Dsun.rmi.dgc.client.gcInterval=600000 -Dsun.rmi.dgc.server.gcInterval=600000) in the site-options.conf file.

        When you change the default value of a JVM parameter such as "-XX:HeapDumpPath", the JBoss runtime parameters include both the user defined and default values for the JVM parameter. However, JBoss runs with the user defined value and ignores the default value.

    17. Important: This step is required if you want Git notification emails.
        Update the JAMES_ACCEPTED_RELAYS site-options token with the Git server's IP address. See JAMES_ACCEPTED_RELAYS for more information.

        JAMES_ACCEPTED_RELAYS=127.0.0.1,{__CEE_DOMAIN__},<The IP address of the Git server>

    18. Save the site-options.conf file.
11. Recreate the runtime environment.
    • cd /opt/collabnet/teamforge-installer/8.2.0.0
    • ./install.sh -r -I -V
12. Update the file permissions on your site's data.
    • /opt/collabnet/teamforge/runtime/scripts/fix_data_permissions.sh
    Note: This process can take a long time for sites with a lot of data.
13. Convert your site data to work with TeamForge 8.2.
    Tip: Before you kick off the data migration, do the following:

    • Use the /etc/init.d/collabnet status command to make sure the JBoss, Tomcat and Tomcatcs services are stopped.
    • If any of the trackers in your project already contains a field with the name team, conflict may arise while running the migrate.py script. This is because of the inclusion of the Team feature in TeamForge 8.0. To prevent this conflict, follow the steps given in FAQ on troubleshooting.
    • /opt/collabnet/teamforge/runtime/scripts/migrate.py
    The migrate.py script locates the existing site data and modifies it as needed.

    This includes configuration data for LDAP and the James mail server. Any modifications that you have applied to these components on your old site are reproduced on your upgraded TeamForge 8.2 site.

14. Start TeamForge.
    • /etc/init.d/collabnet start

15. If you have CVS integrations, synchronize permissions post upgrade. See, Synchronize TeamForge source control integrations.
16. Run the TeamForge post installation script. For more information, see post-install.py.
    1. Use the following command to run the post-install.py script.
       • /opt/collabnet/teamforge/runtime/scripts/post-install.py
       Note: Enter the 'gitadmin' user name and password when prompted.
       Note: In case you face any GIT-related issues while running the post-install.py script, see Post install fails for GIT. What should I do?.
17. Install the Black Duck Code Sight license on the server where Black Duck Code Sight is installed. For more information see these instructions.
18. Run the svn_cache.sh script.
    • cd /opt/collabnet/teamforge/runtime/scripts/codesearch/
    • ./svn_cache.sh <Repository Base URL Path of the SCM Integration Server>

    Provide a repository base URL path of the SCM integration server, for example, "http://myint.box.net/svn/repos", where myint.box is the server with the SCM integration server.

    In addition, if you add a new integration server at some point later, you must run this svn_cache.sh script, (after creating the new integration server), on the TeamForge application server.

Do this on the Git integration server - my.git.host

19. Back up the Git file system data.
    1. Make an archive file with the following data directories.
       Tip: /tmp is just an example. You can use any directory or partition that you prefer.

       Directory	Contents
       /gitroot	Git source code repositories

       • cp -Rpfv /gitroot /tmp/gitbackup_dir
       • cp -Rpfv /opt/collabnet/gerrit/ /tmp/gitbackup_dir/gerrit
    2. Back up your SSH keys, if any.
20. Upgrade the operating system packages.
    • yum upgrade
21. If the TeamForge server has SELinux enabled, disable it temporarily while installing or upgrading TeamForge.
    1. Verify if SELinux is running in enforcing mode.
       • getenforce
    2. If the output of the getenforce command is either "Disabled" or "Permissive", SELinux is already disabled.
    3. If not disabled, run the following command to disable SELinux.
       • setenforce 0
22. Configure your TeamForge installation repository.
    • TeamForge installation repository configuration for sites with internet access
    1. Contact the CollabNet Support and download the TeamForge 8.2 installation repository package to /tmp.
    2. Install the repository package.
       • yum install -y /tmp/collabnet-teamforge-repo-8.2.0.0-1.noarch.rpm
    3. Refresh your repository cache.
       • yum clean all
    • TeamForge installation repository configuration for sites without internet access
    1. Contact the CollabNet Support to get the auxiliary installer package for TeamForge 8.2 disconnected installation and save it in /tmp.
       • Red Hat Enterprise Linux/CentOS 6.7 64 bit RPM package: CTF-Disconnected-media-8.2.0.0-4729.rhel6.x86_64.rpm
    2. Unpack the disconnected installation package.
       • rpm -Uvh <package-name>
    3. Note: If the Red Hat Enterprise Linux/CentOS installation DVD is mounted already, skip the following instructions. If not, mount the DVD.
       Mount the Red Hat Enterprise Linux/CentOS installation DVD. The DVD contains the necessary software and utilities required for installing TeamForge without internet access.

       In the following commands, replace "cdrom" with the identifier for your server's CD/DVD drive, if necessary.

       • cd /media/
       • mkdir cdrom
       • mount /dev/cdrom ./cdrom/

       If there are any spaces in the automount, unmount it first and mount it as a filepath, with no spaces.

    4. Create a yum configuration file that points to the Red Hat Enterprise Linux/CentOS installation DVD.
       • vi /etc/yum.repos.d/cdrom.repo
       Here's a sample yum configuration file.

       [RHEL-CDROM] 
       name=RHEL CDRom 			
       baseurl=file:///media/cdrom/Server/
       gpgfile=file:///media/cdrom/RPM-GPG-KEY-redhat-release 
       enabled=1
       gpgcheck=0

    5. Verify your yum configuration files.
       • yum list httpd
       • yum list apr
23. Install the Git packages.
    • yum install teamforge-git
24. Copy the site-options.conf file from my.app.host and modify the token settings.
    Note: If you choose to use the old site-options.conf file, don’t forget to copy the AUTO_DATA token from the application server.
    1. Set the following tokens.

       HOST_my.git.host=gerrit

       DOMAIN_my.git.host=my.git.domain.com

       HOST_my.app.domain.com=app database datamart etl indexer subversion cvs

    2. Save the site-options.conf file.
25. Important: This step is required if and only if you are upgrading from TeamForge 8.0 (or earlier versions) to TeamForge 8.2.
    As JDK is upgraded to 1.8.0_45, move the existing runtime directory before create-runtime.
    • cd /opt/collabnet/teamforge/
    • mv runtime/ runtime_old
26. Recreate the runtime environment.
    • cd /opt/collabnet/teamforge-installer/8.2.0.0
    • ./install.sh -r -I -V
27. Run the TeamForge post installation script. For more information, see post-install.py.
    1. Use the following command to run the post-install.py script.
       • /opt/collabnet/teamforge/runtime/scripts/post-install.py
       Note: Enter the 'gitadmin' user name and password when prompted.
       Note: In case you face any GIT-related issues while running the post-install.py script, see Post install fails for GIT. What should I do?.
28. Important: This step is required if you want Git notification emails.
    Edit the /opt/collabnet/gerrit/etc/gerrit.config file and update the 'smtpServer' property with the TeamForge application server's host name. For example:

    [sendemail]
                  smtpServer = <TeamForge application server host name>

    1. Restart gerrit.
       • /etc/init.d/collabnet stop gerrit
       • /etc/init.d/collabnet start gerrit

Do the following on the application server - my.app.host

29. Apply the finishing touches and make sure everything is running smoothly after upgrading to TeamForge 8.2.
    Important: Do not delete the teamforge-installer/8.2.0.0 directory. You will need it for future maintenance and upgrades.
    1. Log into your site as the administrator.
    2. If your site has custom branding, verify that your branding changes still work as intended. See Customize anything on your site.
    3. Let your site's users know they've been upgraded. See Communicate with all site users at once.
30. Remove the backup files, if any, after the TeamForge site is up and running as expected. Remove the repository and the file system backup from the /tmp/backup_dir directory.