Install TeamForge, Codesearch, and EventQ on separate servers

Three-server distributed setup with TeamForge, Codesearch and EventQ services installed on three separate servers.

Dos and Don'ts

Check this list before installing or upgrading TeamForge.

Three Server Setup

Here's how the services are distributed across three separate RHEL/CentOS 7.3 servers.
Services TeamForge Application Server (server-01) EventQ Server (server-02) Codesearch Server (server-03)
ctfcore
   
mail
   
search
   
codesearch    
etl
   
gerrit
   
gerrit-database
   
reviewboard
   
reviewboard-database
   
reviewboard-adapter
   
subversion
   
cvs
   
binary
   
binary-database
   
cliserver
   
eventq  
 
mongodb  
 
redis  
 
rabbitmq  
 
ctfcore-database
   
ctfcore-datamart
   

Do this step by step on TeamForge Application Server (server-01)

  1. Install Red Hat Enterprise Linux/CentOS 7.3 and log on as root.

    The host must be registered with the Red Hat Network if you are using Red Hat Enterprise Linux.

    See the Red Hat installation guide for help.

  2. Check your basic networking setup. See Set up Networking for more information.
  3. Configure your TeamForge installation repository.
    • TeamForge installation repository configuration for sites with internet access
    1. Contact the CollabNet Support and download the TeamForge 17.8 installation repository package to /tmp.
    2. Install the repository package.
      • yum install -y /tmp/collabnet-teamforge-repo-17.8-1.noarch.rpm
    3. Refresh your repository cache.
      • yum clean all
    • TeamForge installation repository configuration for sites without internet access
    1. Contact the CollabNet Support to get the auxiliary installer package for TeamForge 17.8 disconnected installation and save it in /tmp.
      • Red Hat Enterprise Linux/CentOS 7.3 64 bit RPM package: CTF-Disconnected-media-17.8.655-104.rhel7.x86_64.rpm
        Note: In addition to the above CentOS 7.3 64 bit RPM package, you must get the following CentOS 7.3 compatibility RPM, which is required for TeamForge 17.8 disconnected media installation on CentOS 7.3 profile: compat-ctf-dc-media-1.1-1.el7.noarch.rpm.
    2. Unpack the disconnected installation package.
      • rpm -ivh <package-name>
    3. Unpack the compat-ctf-dc-media-1.1-1.el7.noarch.rpm package if you are installing TeamForge 17.8 on CentOS 7.3.
      • rpm -ivh compat-ctf-dc-media-1.1-1.el7.noarch.rpm
    4. If not mounted already, mount the Red Hat Enterprise Linux/CentOS installation DVD. The DVD contains the necessary software and utilities required for installing TeamForge without internet access.

      In the following commands, replace "cdrom" with the identifier for your server's CD/DVD drive, if necessary.

      • cd /media/
      • mkdir cdrom
      • mount /dev/cdrom ./cdrom/

      If there are any spaces in the automount, unmount it first and mount it as a filepath, with no spaces.

    5. Create a yum configuration file that points to the Red Hat Enterprise Linux/CentOS installation DVD.
      • vi /etc/yum.repos.d/cdrom.repo
      Here's a sample yum configuration file.
      [RHEL-CDROM] 
name=RHEL CDRom 			
baseurl=file:///media/cdrom/Server/
gpgfile=file:///media/cdrom/RPM-GPG-KEY-redhat-release 
enabled=1
gpgcheck=0
    6. Verify your yum configuration files.
      • yum list httpd
      • yum list apr
  4. Install the TeamForge application packages.
    • yum install teamforge

Important: The following warning message, which shows up during TeamForge install/upgrade (while installing CN-eventq rpm) can be safely ignored.
Don't run Bundler as root. Bundler can ask for sudo if it is needed, and
installing your bundle as root will break this application for all non-root
users on this machine.
...
...
Errno::ENOENT: No such file or directory - git
...
...

  1. Set up your site's master configuration file.
    • vi /opt/collabnet/teamforge/etc/site-options.conf

    host: SERVICES Token

    Note: cliserver and reviewboard-adapter are the new services added in TeamForge 17.4.
    • server-01:SERVICES=ctfcore ctfcore-database ctfcore-datamart mail etl search subversion cvs 
cliserver gerrit gerrit-database  binary binary-database reviewboard reviewboard-database reviewboard-adapter
    • server-02:SERVICES=eventq mongodb redis rabbitmq
    • server-03:SERVICES=codesearch
    Note: You may remove the identifiers of components you do not want. For example, remove binary and binary-database if you are not planning to install binary repository managers such as Nexus. See TeamForge services for more information.

    host: PUBLIC_FQDN Token

    server-01:PUBLIC_FQDN=my.app.domain.com

    Save the site-options.conf file.

    For further customization of your site configuration:

    SSL Tokens

    SSL is enabled by default and a self-signed certificate is auto-generated. Use the following tokens to adjust this behavior.
    SSL_CERT_FILE=
    SSL_KEY_FILE=
    SSL_CHAIN_FILE=
    • To generate the SSL certificates, see Generate SSL certificates.
    • Have the custom SSL certificate and private key for custom SSL certificate in place and provide their absolute paths in these tokens. SSL_CHAIN_FILE (intermediate certificate) is optional.
    • All SSL certificates including self-signed certificates are added automatically.

    Password Tokens

    • TeamForge 7.1 and later support automatic password creation. See AUTO_DATA for more information.
    • If the token REQUIRE_PASSWORD_SECURITY is enabled, then set a value for the token, PASSWORD_CONTROL_EFFECTIVE_DATE.
      Warning: The Password Control Kit (PCK) disables, deletes or expires user accounts that don't meet the password security requirements starting from the date set for the PASSWORD_CONTROL_EFFECTIVE_DATE token. If a date is not set, the PCK disables, deletes or expires user accounts immediately. See PASSWORD_CONTROL_EFFECTIVE_DATE for more information.
    • If the token REQUIRE_RANDOM_ADMIN_PASSWORD is already set to true, then set the token ADMIN_EMAIL with a valid email address.
      ADMIN_EMAIL=root@{__APPLICATION_HOST__}
    • If you have LDAP set up for external authentication, you must set the “REQUIRE_USER_PASSWORD_CHANGE” site options token to false.

    PostgreSQL Tokens and Settings

  2. Provision services.
    • teamforge provision
    Note:

    TeamForge 17.4 (and later) installer expects the system locale to be LANG=en_US.UTF-8. TeamForge "provision" command fails otherwise.

Do this step by step on Codesearch Server (server-03)

  1. Install Red Hat Enterprise Linux/CentOS 7.3 and log on as root.

    The host must be registered with the Red Hat Network if you are using Red Hat Enterprise Linux.

    See the Red Hat installation guide for help.

  2. Check your basic networking setup. See Set up Networking for more information.
  3. Configure your TeamForge installation repository.
    • TeamForge installation repository configuration for sites with internet access
    1. Contact the CollabNet Support and download the TeamForge 17.8 installation repository package to /tmp.
    2. Install the repository package.
      • yum install -y /tmp/collabnet-teamforge-repo-17.8-1.noarch.rpm
    3. Refresh your repository cache.
      • yum clean all
    • TeamForge installation repository configuration for sites without internet access
    1. Contact the CollabNet Support to get the auxiliary installer package for TeamForge 17.8 disconnected installation and save it in /tmp.
      • Red Hat Enterprise Linux/CentOS 6.9 64 bit RPM package: CTF-Disconnected-media-17.8.655-104.rhel6.x86_64.rpm
    2. Unpack the disconnected installation package.
      • rpm -ivh <package-name>
    3. If not mounted already, mount the Red Hat Enterprise Linux/CentOS installation DVD. The DVD contains the necessary software and utilities required for installing TeamForge without internet access.

      In the following commands, replace "cdrom" with the identifier for your server's CD/DVD drive, if necessary.

      • cd /media/
      • mkdir cdrom
      • mount /dev/cdrom ./cdrom/

      If there are any spaces in the automount, unmount it first and mount it as a filepath, with no spaces.

    4. Create a yum configuration file that points to the Red Hat Enterprise Linux/CentOS installation DVD.
      • vi /etc/yum.repos.d/cdrom.repo
      Here's a sample yum configuration file.
      [RHEL-CDROM] 
name=RHEL CDRom 			
baseurl=file:///media/cdrom/Server/
gpgfile=file:///media/cdrom/RPM-GPG-KEY-redhat-release 
enabled=1
gpgcheck=0
    5. Verify your yum configuration files.
      • yum list httpd
      • yum list apr
  4. Install the Codesearch packages.
    • yum install teamforge-codesearch
  5. Copy the site-options.conf file from the TeamForge Application Server (server-01) to the Codesearch Server's /opt/collabnet/teamforge/etc/ directory.
  6. Provision services.
    • teamforge provision
    Note:

    TeamForge 17.4 (and later) installer expects the system locale to be LANG=en_US.UTF-8. TeamForge "provision" command fails otherwise.

Do this step by step on EventQ Server (server-02)

  1. Install Red Hat Enterprise Linux/CentOS 7.3 and log on as root.

    The host must be registered with the Red Hat Network if you are using Red Hat Enterprise Linux.

    See the Red Hat installation guide for help.

  2. Check your basic networking setup. See Set up Networking for more information.
  3. Configure your TeamForge installation repository.

    TeamForge installation repository configuration for sites with internet access

    1. Contact the CollabNet Support and download the TeamForge 17.8 installation repository package to /tmp.
    2. Install the repository package.
      • yum install -y /tmp/collabnet-teamforge-repo-17.8-1.noarch.rpm
    3. Refresh your repository cache.
      • yum clean all

    TeamForge installation repository configuration for sites without internet access

    1. Contact the CollabNet Support to get the auxiliary installer package for TeamForge 17.8 disconnected installation and save it in /tmp.
      • Red Hat Enterprise Linux/CentOS 7.3 64 bit: CTF-Disconnected-media-17.8.655-104.rhel7.x86_64.rpm
      • In addition to the above CentOS 7.3 64 bit RPM package, you must get the following CentOS 7.3 compatibility RPM, which is required for TeamForge 17.8 disconnected media installation on CentOS 7.3 profile: compat-ctf-dc-media-1.1-1.el7.noarch.rpm.
    2. Unpack the disconnected installation package.
      • rpm -ivh <package-name>
    3. Unpack the compat-ctf-dc-media-1.1-1.el7.noarch.rpm package if you are installing TeamForge 17.8 on CentOS 7.3.
      • rpm -ivh compat-ctf-dc-media-1.1-1.el7.noarch.rpm
    4. If not mounted already, mount the Red Hat Enterprise Linux/CentOS installation DVD.

      The DVD contains the necessary software and utilities required for installing TeamForge without internet access. In the following commands, replace "cdrom" with the identifier for your server's CD/DVD drive, if necessary.

      • cd /media/
      • mkdir cdrom
      • mount /dev/cdrom ./cdrom/

      If there are any spaces in the automount, unmount it first and mount it as a filepath, with no spaces.

    5. Create a yum configuration file that points to the Red Hat Enterprise Linux/CentOS installation DVD.
      • vi /etc/yum.repos.d/cdrom.repo
      Here's a sample yum configuration file.
      [RHEL-CDROM] 
name=RHEL CDRom 			
baseurl=file:///media/cdrom/Server/
gpgfile=file:///media/cdrom/RPM-GPG-KEY-redhat-release 
enabled=1
gpgcheck=0
    6. Verify your yum configuration files.
      • yum list httpd
      • yum list apr
  4. Install the EventQ packages.
    • yum install teamforge-eventq

Important: The following warning message shows up when you run yum install teamforge, which can be safely ignored.
Don't run Bundler as root. Bundler can ask for sudo if it is needed, and
installing your bundle as root will break this application for all non-root
users on this machine.

  1. Copy the site-options.conf file from the TeamForge Application Server (server-01) to the EventQ Server's /opt/collabnet/teamforge/etc/ directory.
  2. Provision services.
    • teamforge provision
    Note:

    TeamForge 17.4 (and later) installer expects the system locale to be LANG=en_US.UTF-8. TeamForge "provision" command fails otherwise.

Do this step by step on TeamForge Application Server (server-01)

  1. Restart TeamForge.
    • teamforge restart
  2. Verify TeamForge installation.
    1. Reboot the server and make sure all services come up automatically at startup.
    2. Log on to the TeamForge web application using the default Admin credentials.
      • Username: "admin"
      • Password: "admin"
    3. Create a sample project. See Create a TeamForge project
    4. Write a welcome message to your site's users. See Create a site-wide broadcast.

Post Installation Tasks

Parent topic: Install TeamForge
Related concepts
TeamForge installation/upgrade/configuration/administration FAQs
Related tasks
Set up SSL for your TeamForge site