While setting up PXE-based servers as client nodes, configure these BIOS settings for Lab Management.
The following descriptions can vary depending on the actual motherboard model
and the BIOS manufacturers:
-
Boot Order: Lab Management Client Nodes should boot from the LAN (PXE boot) before
the local hard disk.
-
Power Failure mode: After a power failure, the system should return to its
formal state (if the machine was down before the power outage, keep it in its
down state. However, if the machine was running before the power failure, then
make certain that it is running after power is restored).
For more information, refer to the BIOS setup product documentation for your particular hardware.