Install TeamForge 8.2: Database and Datamart on a separate server

In this option, we install the Database (Operational Database) and Datamart (Reporting database) on a separate server and other services on the main application server. If you want Black Duck Code Sight, you must install it on a separate RHEL/CentOS 6.7 server.

1. Install Red Hat Enterprise Linux/CentOS 7.2 and log in as root.
   • Red Hat Enterprise Linux/CentOS 6.7 is also supported. See Software requirements for CollabNet TeamForge 8.2.
   • The host must be registered with the Red Hat Network if you are using Red Hat Enterprise Linux. See Platform specification for TeamForge 8.2 for the full platform requirements.
   • See the Red Hat installation guide for help.
   Important: Don't customize your installation. Select only the default packages list.
2. Create a file, /etc/security/limits.d/teamforge.conf, and make sure it has the following "nproc" and "nofile" settings.
   • vim /etc/security/limits.d/teamforge.conf
   • sf-admin soft nproc 10240
   • sf-admin hard nproc 10240
   • sf-admin hard nofile 65536
   • sf-admin soft nofile 65536
   • Save the file and reboot the server.
3. Check your basic networking setup. See Set up networking for your TeamForge server for details.
4. If the TeamForge server has SELinux enabled, run it in 'Permissive' mode temporarily while installing or upgrading TeamForge.
   1. Verify if SELinux is running in enforcing mode.
      • getenforce
   2. If the output of the getenforce command is "Permissive", continue with the next step. If not, run the following command to bring it to 'Permissive' mode.
      • setenforce 0
   See Set up SELinux to have TeamForge run in SELinux mode after completing the installation or upgrade.
5. Configure your TeamForge installation repository.
   • TeamForge installation repository configuration for sites with internet access
   1. Contact the CollabNet Support and download the TeamForge 8.2 installation repository package to /tmp.
   2. Install the repository package.
      • yum install -y /tmp/collabnet-teamforge-repo-8.2.0.0-1.noarch.rpm
   3. Refresh your repository cache.
      • yum clean all
   • TeamForge installation repository configuration for sites without internet access
   1. Contact the CollabNet Support to get the auxiliary installer package for TeamForge 8.2 disconnected installation and save it in /tmp.
      • Red Hat Enterprise Linux/CentOS 7.2 64 bit RPM package: CTF-Disconnected-media-8.2.0.0-4729.rhel7.x86_64.rpm
        Note: In addition to the above CentOS 7.2 64 bit RPM package, you must get the following CentOS 7.2 compatibility RPM, which is required for TeamForge 8.2 disconnected media installation on CentOS 7.2 profile: compat-ctf-dc-media-1.0-1.el7.centos.noarch.rpm.
   2. Unpack the disconnected installation package.
      • rpm -ivh <package-name>
   3. Unpack the compat-ctf-dc-media-1.0-1.el7.centos.noarch.rpm package if you are installing TeamForge 8.2 on CentOS 7.2.
      • rpm -ivh compat-ctf-dc-media-1.0-1.el7.centos.noarch.rpm
   4. Note: If the Red Hat Enterprise Linux/CentOS installation DVD is mounted already, skip the following instructions. If not, mount the DVD.
      Mount the Red Hat Enterprise Linux/CentOS installation DVD. The DVD contains the necessary software and utilities required for installing TeamForge without internet access.

      In the following commands, replace "cdrom" with the identifier for your server's CD/DVD drive, if necessary.

      • cd /media/
      • mkdir cdrom
      • mount /dev/cdrom ./cdrom/

      If there are any spaces in the automount, unmount it first and mount it as a filepath, with no spaces.

   5. Create a yum configuration file that points to the Red Hat Enterprise Linux/CentOS installation DVD.
      • vi /etc/yum.repos.d/cdrom.repo
      Here's a sample yum configuration file.

      [RHEL-CDROM] 
      name=RHEL CDRom 			
      baseurl=file:///media/cdrom/Server/
      gpgfile=file:///media/cdrom/RPM-GPG-KEY-redhat-release 
      enabled=1
      gpgcheck=0

   6. Verify your yum configuration files.
      • yum list httpd
      • yum list apr
6. Install the following application packages.
   1. TeamForge: To install the TeamForge application packages run the following command:
      • yum install teamforge
   2. GIT: To install the GIT packages run the following command.
      • yum install teamforge-git
7. Set up your site's master configuration file.
   • vi /opt/collabnet/teamforge-installer/8.2.0.0/conf/site-options.conf
   1. Identify the servers and services running on them.

      HOST_localhost=app etl indexer subversion cvs

      DOMAIN_localhost=my.app.domain.com

      HOST_my.db.domain.com=database datamart

   2. Add 'gerrit' to the HOST_localhost token if you are installing Git.

      HOST_localhost=app etl indexer subversion cvs gerrit

   3. Add 'binary' to the HOST_localhost token if you are installing Nexus.

      HOST_localhost=app etl indexer subversion cvs gerrit binary

   4. Configure the following token if you are installing Black Duck Code Sight.

      HOST_my.codesight.domain.com=codesearch

   5. Configure the database and datamart settings.
      Note: For more information about configuring variables, see site-options.conf

      DATABASE_TYPE=postgresql

      DATABASE_USERNAME=ctfuser

      DATABASE_NAME=ctfdb

      DATABASE_READ_ONLY_USER=ctfrouser

      REPORTS_DATABASE_USERNAME=ctfrptuser

      REPORTS_DATABASE_NAME=ctfrptdb

      REPORTS_DATABASE_READ_ONLY_USER=ctfrptrouser

      REPORTS_DATABASE_MAX_POOL_SIZE=30

      Note: The database name and username values are arbitrary alphanumeric strings.
   6. TeamForge 7.1 and later support automatic password creation. See AUTO_DATA for more information.
   7. Password obfuscation: The password obfuscation is enabled by default. As a result, all password-related tokens are encrypted in all the TeamForge configuration files.
      Restriction: The password-related tokens cannot contain the following characters in the site-options.conf file: $<>/\'"`
      • To disable password obfuscation, set OBFUSCATION_ENABLED=false.
      • To configure the obfuscation key, set OBFUSCATION_KEY=<Any AlphaNumeric value with length >= 8 bytes>. The default value of OBFUSCATION_KEY token is XSJt43wN.
   8. Turn on the SSL for your site by editing the relevant variables in the site-options.conf file. To generate the SSL certificates, see Generate SSL certificates.

      SSL=on

      SSL_CERT_FILE

      SSL_KEY_FILE

      SSL_CHAIN_FILE

      Note: The SSL_CERT_FILE and SSL_KEY_FILE tokens need an absolute path. The SSL_CHAIN_FILE token is optional.
   9. If the token REQUIRE_PASSWORD_SECURITY is enabled, then set a value for the token, PASSWORD_CONTROL_EFFECTIVE_DATE.
      CAUTION:
      The Password Control Kit (PCK) disables, deletes or expires user accounts that don't meet the password security requirements starting from the date set for the PASSWORD_CONTROL_EFFECTIVE_DATE token. If a date is not set, the PCK disables, deletes or expires user accounts immediately. See PASSWORD_CONTROL_EFFECTIVE_DATE for more information.
   10. Include the SCM_DEFAULT_SHARED_SECRET token in the site-options.conf file of the primary TeamForge server and provide it with a value of 16-24 characters.
       Important: Remember to use the same key in the external SCM integration server also.
   11. If the token REQUIRE_RANDOM_ADMIN_PASSWORD is already set to true, then set the token ADMIN_EMAIL with a valid email address. ADMIN_EMAIL=root@{__APPLICATION_HOST__}
   12. If you have LDAP set up for external authentication, you must set the “REQUIRE_USER_PASSWORD_CHANGE” site options token to false.
   13. Ensure to set the token DEDICATED_INSTALL=true. This makes the installation process very simple as the TeamForge installer takes care of configuring the Apache and PostgreSQL automatically.
   14. Make sure that the following tokens have a value if ETL is enabled.

       SOAP_ANONYMOUS_SHARED_SECRET

       ETL_SOAP_SHARED_SECRET

   15. Configure Black Duck Code Sight tokens if you are installing Black Duck Code Sight. See Black Duck Code Sight site-option tokens.
   16. To enable the history protection feature of TeamForge Git integration, set the GERRIT_FORCE_HISTORY_PROTECTION=true. For more information, see GERRIT_FORCE_HISTORY_PROTECTION.
   17. Ensure to set the token SELINUX_SETUP=true.
   18. Make sure the PostgreSQL tokens in the site-options.conf file are set as recommended in the following topic: What are the right PostgreSQL settings for my site?
   19. Save the site-options.conf file.
8. Recreate the runtime environment.
   • cd /opt/collabnet/teamforge-installer/8.2.0.0
   • ./install.sh -r -I -V

Do this on the database server - my.db.host

9. Install Red Hat Enterprise Linux/CentOS 7.2 and log in as root.
   • Red Hat Enterprise Linux/CentOS 6.7 is also supported. See Software requirements for CollabNet TeamForge 8.2.
   • The host must be registered with the Red Hat Network if you are using Red Hat Enterprise Linux. See Platform specification for TeamForge 8.2 for the full platform requirements.
   • See the Red Hat installation guide for help.
   Important: Don't customize your installation. Select only the default packages list.
10. Check your basic networking setup. See Set up networking for your TeamForge server for details.
11. If the TeamForge server has SELinux enabled, disable it temporarily while installing or upgrading TeamForge.
    1. Verify if SELinux is running in enforcing mode.
       • getenforce
    2. If the output of the getenforce command is either "Disabled" or "Permissive", SELinux is already disabled.
    3. If not disabled, run the following command to disable SELinux.
       • setenforce 0
12. Configure your TeamForge installation repository.
    • TeamForge installation repository configuration for sites with internet access
    1. Contact the CollabNet Support and download the TeamForge 8.2 installation repository package to /tmp.
    2. Install the repository package.
       • yum install -y /tmp/collabnet-teamforge-repo-8.2.0.0-1.noarch.rpm
    3. Refresh your repository cache.
       • yum clean all
    • TeamForge installation repository configuration for sites without internet access
    1. Contact the CollabNet Support to get the auxiliary installer package for TeamForge 8.2 disconnected installation and save it in /tmp.
       • Red Hat Enterprise Linux/CentOS 7.2 64 bit RPM package: CTF-Disconnected-media-8.2.0.0-4729.rhel7.x86_64.rpm
         Note: In addition to the above CentOS 7.2 64 bit RPM package, you must get the following CentOS 7.2 compatibility RPM, which is required for TeamForge 8.2 disconnected media installation on CentOS 7.2 profile: compat-ctf-dc-media-1.0-1.el7.centos.noarch.rpm.
    2. Unpack the disconnected installation package.
       • rpm -ivh <package-name>
    3. Unpack the compat-ctf-dc-media-1.0-1.el7.centos.noarch.rpm package if you are installing TeamForge 8.2 on CentOS 7.2.
       • rpm -ivh compat-ctf-dc-media-1.0-1.el7.centos.noarch.rpm
    4. Note: If the Red Hat Enterprise Linux/CentOS installation DVD is mounted already, skip the following instructions. If not, mount the DVD.
       Mount the Red Hat Enterprise Linux/CentOS installation DVD. The DVD contains the necessary software and utilities required for installing TeamForge without internet access.

       In the following commands, replace "cdrom" with the identifier for your server's CD/DVD drive, if necessary.

       • cd /media/
       • mkdir cdrom
       • mount /dev/cdrom ./cdrom/

       If there are any spaces in the automount, unmount it first and mount it as a filepath, with no spaces.

    5. Create a yum configuration file that points to the Red Hat Enterprise Linux/CentOS installation DVD.
       • vi /etc/yum.repos.d/cdrom.repo
       Here's a sample yum configuration file.

       [RHEL-CDROM] 
       name=RHEL CDRom 			
       baseurl=file:///media/cdrom/Server/
       gpgfile=file:///media/cdrom/RPM-GPG-KEY-redhat-release 
       enabled=1
       gpgcheck=0

    6. Verify your yum configuration files.
       • yum list httpd
       • yum list apr
13. Install the TeamForge database packages.
    • yum install teamforge-database
14. Copy the site-options.conf file from the my.app.host to the database server in the directory /opt/collabnet/teamforge-installer/8.2.0.0/conf
15. Modify the host token settings on the site-options.conf file.
    Important: If you choose not to use the application server's site-options.conf file, then don't forget to copy the value of AUTO_DATA token from the application server.

    • HOST_my.db.host=database datamart

      Note: 'HOST_my.db.host' is just an example. As you are installing database on a separate server, do not use 'HOST_localhost'. Use 'HOST_<valid host name>' instead.

    • DOMAIN_my.db.host=my.db.domain.com

    • HOST_my.app.domain.com=app etl indexer subversion cvs gerrit

16. Recreate the runtime environment.
    • cd /opt/collabnet/teamforge-installer/8.2.0.0
    • ./install.sh -r -I -V

Do the following on the Black Duck Code Sight server - my.codesight.host.

17. Set up Black Duck Code Sight on a separate server. See Install Black Duck Code Sight on a separate RHEL/CentOS 6.7 server.

Do the following on the application server - my.app.host

18. Set up the initial site data (bootstrap).
    • cd /opt/collabnet/teamforge-installer/8.2.0.0
    • ./bootstrap-data.sh
19. Start TeamForge.
    • /etc/init.d/collabnet start

20. Important: If the token REQUIRE_USER_PASSWORD_CHANGE is set to true, login to TeamForge user interface, change the admin password and then run the post-install.py script.
    Run the TeamForge post installation script. For more information, see post-install.py.
    • /opt/collabnet/teamforge/runtime/scripts/post-install.py
    Note: In case you face any GIT-related issues while running the post-install.py script, see Post install fails for GIT. What should I do?.
21. Revoke the super user permissions of database and datamart users.
    • /opt/collabnet/teamforge/runtime/scripts/revoke-superuser-permission.py
22. Restart the collabnet services.
    • /etc/init.d/collabnet restart
23. Apply some finishing touches and make sure everything is running smoothly.
    1. Reboot the server and make sure all services come up automatically at startup.
    2. Log into your site as the administrator. The value of the DOMAIN variable in the site-options.conf file is the URL to log into.
    3. Create a sample project. See Create a TeamForge project.
    4. Write a welcome message to your site's users. See Create a site-wide broadcast.