You must enable, then re-start TeamForge so that you can use an external tool to query
the datamart directly.
You cannot use external reporting tools to connect directly to a datamart if you have
a single-box installation using
localhost:SERVICES.
-
Edit the site-options.conf file. Set
REPORTS_DB_ACCESS_HOSTS to the IP address or IP address
range (CIDR address) from which the tool will establish connection to the
datamart. Specify multiple IPs as a comma-separated list.
For example: REPORTS_DB_ACCESS_HOSTS = 10.0.0.2,10.2.1.0/24
Note:
- If the TeamForge site is not within your network and a Network
Address Translation (NAT) is configured, then specify the NAT's
external facing IP in the token.
- If you have used an "advanced" installation method to install
TeamForge, you must also manually add the IP addresses to the
pg_hba.conf file.
-
In site-options.conf, set
REPORTS_DATABASE_READ_ONLY_USER and
REPORTS_DATABASE_READ_ONLY_PASSWORD with your user and
password.
-
On the TeamForge host machine, enable REPORTS_DATABASE_HOST
and REPORTS_DATABASE_PORT for remote access.
-
Deploy services.
- /opt/collabnet/teamforge/bin/teamforge
provision
The "provision" command prompts for response before it bootstraps or migrates
data during TeamForge installation and upgrade respectively. Enter "Yes" or
"No" to proceed. For more information, see The teamforge script.
You can now enable trusted users to establish connections by providing them with
values of options REPORTS_DATABASE_HOST,
REPORTS_DATABASE_PORT,
REPORTS_DATABASE_READ_ONLY_USER, and
REPORTS_DATABASE_READ_ONLY_PASSWORD.